About Custom Control Wire
The newest custom control wire is for those people who wants to control the light bar with their vehicle control system panel. There are four wires on the control box, two wires go to the positive and negative power wires, and the others go to the signal wires to control the color. Touch the positive wire with anyone signal wire to show color.
(There will be no strobe function for this custom control wire unless you have a strobe function on your vehicle.)
About Brake/Turn Signal Line
This Brake/Turn Signal Line has 3 wires, which will have different flash effects when touch with positive wire.
Black Line for Right Turn;
Yellow Line for Left Turn;
Red Line for Brake.
The 4 inch 30W color changing led pod is the newest member of the pods family, its appearance is a little different with the 3 inch one, but the modes are the same, and it has more functions, it is brighter and more concentrated. With the adjustable mounting brackets, you can easily change the position and direction.
Learn More About the Products:
Dimension: 4" length x 3.5" height x 3" depth
Waterproof Rate: IP 67
Color Temperature: 6000K
Input: 12V-24V DC
Lifespan: >30,000 hrs
Body Material: Powdercoated Cast Aluminum
Light Source: Cree XT-E
Working Temperature: -40℃ ~ +85℃
Warranty: 1 Year
What include the package:
Led pods: 8 x 4" 30W alternate flash led pods
Hardware: Hex mounting screw for pods
Wiring: 1 x One Octave Synchronous Wire Harness
Bracket: 8 x universal mount bracket for pods
How to use the anti-interfence remote:
Identification code learning: within 6 seconds after the pods are on power, click one of any buttons of the new remote at least three seconds, then let go of it, remote learning finish.
If you want to use over two remote to control these pods, please repeat the operation within 6 seconds after the first step.
If you still can not control the pods, please repeat the operation of first step as well.
Delete identification code: click one of any buttons before pods are on power, connect the pods to power source, continue clicking the button over 3 seconds, then let go of it, identification code is deleted.
If delete fail, please repeat the operation.