2: charge from Solar 3:stainless steel
4:have fours light models (normal,flashing,Ambient Light)
5:change color with remote control
1)Stick the small slot type screwdriver into the vehicle-logo cover of the wheel and pry it out slowly.
2)Measure the diameter and width of the vehicle-logo cover with a caliper or a common ruler.
3)Loosen the screws of setting feet with cross screwdriver. stretch the feet position to facilitate size adjustment.
4)Adjust the size of the feet position of wheel lights according to the size of the vehicle-logo cover measured by the caliper.
5)Pick up the vehicle-logo cover with caliper.Get the height from the hell bottom to the top.
6)Stretch the feet position of wheel lights to the same size of the car's feet position.Install the clip according to the height of the card feet.4 feet should all be installded and then the card position installation is completed.
7)Take the spring out.Put the spring in the card position which is in middle of the card feet position.
8) Put the product into the tire intermediate.
9)Long press 3 seconds to turn on after installation.