We LOVE our light bar pods!!! These are so perfect. I love that they flash just like construction vehicles
Added these to my UTV for our feral hog control activities in Central Texas. Having the Green/White combo is great because it allows for stealthy operation (green light) and super bright white LEDs when we need the extra light.
This lights are amazing. I’ll definitely be ordering more as soon as we done with this virus going on around and we get back to normal
Looked for a long time to get what I wanted and needed for my application. Very pleased with these lights. They are very bright and easy to switch through patterns. Recommend getting the extension wires if putting them front and back of vehicle.
I bought these to put in place of the foglights on my 2014 Ford F-250....a little modification and they fit right it in the housing. Wired to my up-fitter switches in the cab. They are bright, work great, and have multiple flash patterns. Good product I would buy again 👍🏻
Very happy with these light pods , very handy having the Bluetooth controller to set different combos , excellent customer service would highly recommend. K
They were shipped as promised in time for an event i was having 5 days later! The quality and brightness of these lights are so awesome!
My son is beyond happy with this bumper and how quick it was delivered
Lights worked as indicated . Wire harness was very well constructed and sealed . Good buy
These side shooter led ditch lights are a perfect addition to any vehicle needing to be seen. The white spot light will help you see what is in front (or behind) you with ease. Using these on a plow truck, or tow truck will increase your safety. The flashing amber lights are a great way to add visibility to your car or truck.
- 30w of White LED in a 30 degree spot pattern
- Luminous flux: 1W 140LM 30W *140LM=4200 LM for Each Pod
- 18w of Amber/Green/Red/Blue LED in side shooting configuration
- Amber can be changed from solid to strobe effect
- Amber and White are controlled separately
- Used or emergency, tow, race, or just to be seen
- Turning on and off cycles from strobe to solid patterns
- 2 Years Warranty
- 3.75"wide x 2.95" tall x 3" deep
- Wiring Harness Length: 16.4 (ft)
- 12-24v, 1.5A
- 2/4/6/8 x Side Shooter led light pods
- Universal Mount Bracket for Pods
- 1 set of Wiring Harness
- 1 x Wireless Remote or Pre-wired controller
- 1 x Synchronous Wire Harness
QUESTIONS & ANSWERSAsk a Question
I'm looking to replace my old sho-me lights that are wired to toggle switches and a stand alone strobe controller. Will these lights work ? Or are they only designed to work with your controller?
yes, you can choose 3 pin custom wires for your own toggle switches. it fits for any switch
Do the flash patterns stay the same or do they alternate every few seconds??
no, they don't flash all the way , these light can stay solid color , also flash a pattern by wireless remote button , when you press the button, they will change a patterns,
the video in the website is demo video including all patterns
Can these be wired so the white man body comes on automatically with the reverse and the sides come on with the individual turn signals, and also be on demand with the switch?
yes, we can custom make it for you , do you want in total 4 pins wires, 1) the first wire for white main leds with the reverse lights, 2) turn left wire, 3) turn right wire 4) turn on/off wire , is it right , when you place an order, please leave a note, we will make it according to your requestion
Hi there could you give me a price for a complete set of 6 including everything with green side shooter please
6 packs for sale $447, you can choose 6 packs when you add them into shopping cart, choose color green, order link 3.75'' Dual Side Shooter led light pods | Vivid Light Bars
Do I need a brake/turn signal cable for each pod? Does the turn signal only flash one side of the pod? Can the pods be configured with different colors (example yellow outside and red inside)? If split color, can the yellow be wired to turn signal and the red wired to brake?
Hi, thanks for your inquiry. If you need customize the light bar, please inform us of your required size and attach specific details contact us: email@example.com. Thank you.
Can you wire in the sides for marker/signal lights?
Yes, you can also add the BRAKE/TURN SIGNAL LINE.
How long does it take to ship?
Hi, thank you for your inquiry.
We will try our best to ship the goods once we receive your payment.
1) If we have them in stock,we will ship them on the same day of receiving payment so you could receive them as early.
2) If we run out of stock, it will take extra 5-7 business days to make and test products and plus delivery time.
Shipping way will be Fedex or DHL ,The lights that is less than 50 inches are usually shipped by DHL, More than 50" , ship by Fedex. Once we have packed your orders, delivery time of DHL would be 7-10 business days, delivery time of Fedex would be 10 -15 business days.
But If you catch a holiday period, such as from Black Friday to Christmas Day, it usually takes 10-15 business days to make and test lights for tons of order waiting in line . delivery time of DHL would be 10- 14 business days, delivery time of Fedex would be 15-20 business days
I would like to hook up the white lights to my reverse lights and have my strobe yellow light on the switch can this be done?
Hi, yes, you can do it , when you place an order, you need choose custom wire option , then we can custom make it for you according to your request
Hi there is the wiring comparable with uk standard vehicle lights.
Hi, thank you for your question. The wiring is universal, and the voltage is 12-24v, 1.5A. If the voltage is over 24V, it will burn out.
What is the range in feet of the wireless controller?
Hi, the range of the wireless contraller is about 9.84 feet.
Can these be ordered with a flood beam for use as trailer reverse lights instead of a spot beam?
Hello, yes, they can be used as reverse light , just choose add brake turn signal reverse wire option when you add it into shopping cart
Bonjour j'ai déjà le câblage. Je voudrais savoir si il est possible d'avoir seulement les spots merci
Bonjour, oui, vous pouvez noter que vous avez juste besoin des pods (pas besoin de faisceau de câbles) lorsque vous passez une commande.
Is the pre wired controller able to be used on multiple lights like some side shooters and a light bar? Also can the pre wired controller be mounted? Is there stuff on it to mount it? Are wireless remotes able to be used on the pre wired set up?
Hello, yeah, the 8-button pre-wired controller can be used on multiple lights (seperate control and sync control). The 4-button pre-wired controller is used for sync control a light bar and some side shooters. There is no stuff on it to mount it, but you could use double-sided tape to fix it somewhere. As for the third question, due to the harnesses corresponding to the two controllers are different, the wireless remotes aren't able to be used on the pre-wired set up generally. If you would like to use the wireless remote on the pre-wired set up, you need to change to the corresponding wiring harness.
Does anyone have a wiring diagram to each mode for the 3.75” dual side shooter dual color strobe Cree pods ?
Hi, thanks for your inquiry. If you choose the custom cobtrol wire for push button switch, you just need to wire 4 wires to 4 push button switches, and then you can use the push button switch to change the pattern.
I already have 4 mounted light , do you sell just that controller?
Hello, sure, here is the order link of that controller, order link: https://www.vividlightbars.com/collections/accessories/products/anti-interference-remote-wireless-remote-for-dual-color-light-bars-pods
how would I set up the wiring so i can turn the white lights on/off steady burn and separately turn the colored strobes on/off and still select a flash pattern
Hello, you don't need to set up the wiring. The WIRELESS REMOTE CONTROLLER includes the functions and patterns you mentioned.
Is there a way to get a power button or the wireless remote?
Hello, yes, you could choose "WIRELESS REMOTE CONTROLLER" at the "ADD CONTROLLER*".
I pull a lot of oversized loads and need weatherproof as well as longevity easy to install on a 567 peterbilt
Hello, our 3.75'' Dual Side Shooter Dual Color Strobe Cree Pods are high-quality, durable and weatherproof, and they're easy to install. In general, they could hold up to the conditions you mentinoned.
Can all the LEDs be set to solid white (including the side lights) then switched to a second mode of stobing?
Hello, Thanks for your inquiry. This LED can be solid white. If you want to design it all solid white , please note about it and how you want to control your lights when you place an order. Thanks.
Im interested in the pre-wired controller. Do you have a photo and does it still allow the same options as the remotes?
Hi, we have photo of pre-wired controller in the product image, please have a look. The wireless remote and pre-wired controller are the same, same programme inside. The only one different is the pre-wired controller has a wire come out the remote.
Is it possible to get the pre-wired controller and control the back 2 lights and the front 2 lights separate
Hi, yes, please leave a note when you place the order, and Please purchase an additional controller (select 44-4), we can help you make a pre-wired, the link:https://www.vividlightbars.com/collections/accessories/products/8-buttons-wireless-remote-controller-for-light-bars-and-pods-package?variant=14944676216878
With the new wiring option can they be wired directly to the stock up fitter switch in the truck
Hello, Thanks for your inquiry. our new custom wire control has 4 lines in total, each line represents a different function, you can connect them to the switch on your truck.
I’m very interested. I wanna run 2 in front and 2 in back. Do you have a wiring harness with a 4 switch controller so I can run front and rear lights independent as well as running front and rear strobes independent
Hello, Thanks for your inquiry. As long as you note how you want to control your lights when you place an order, we will email to confirm with you.
Can I use my own led flasher with these lights or is it specific to yours ?
Hello, if your vehicle has a strobe device, you can choose custom control wire, but we generally recommend using our controller. For custom control wire, if you have any questions, please email us: firstname.lastname@example.org
Can the side leds be amber and the center lights be white BUT all light up at once? Also how good is the antenna for your controller? Ive hsd remotes before and they had a hard time actually working.
Hi, Thanks for your inquiry. Yes, they can be light up at once. Please check this link: https://youtu.be/Pg1WxhdXL8I
The functions of our remote control are the same.[Button A is Turn On/Off, Button B is sync strobe/flash patterns, Button C is alternate strobe patterns, Button D is solid pattern.] If you don't like wireless remote, you can choose per-wired remote controler.
I got a 4 pack can I just turn 2 on or is it always all 4 and the instructions say about remote programming my remote works already
Hello, if you buy 4 pack, you can control 4 pods at the same time. If you want to control 2 of them individually as a group, and you also want to control 4 at the same time, you can buy our multi-frequency wireless remote control. Our remote is programmed to control the lights directly.
Once a flash pattern is selected, will the lights retain that pattern each time you turn them on and off? Or do you need to scroll through the flash patterns each time you activate the lights?
Hello, Thanks for your inquiry. This light has a memory function, when you turn it off and on, it will still be the last mode you selected.
If it’s including a wiring harness does that wire harness have a switch like the very last picture ans can you also run the key chain switches with those
Hi, Thanks for your inquiry. Yes, this lights including a wiring harnes, the button of this harness is the power switch button of the light. Turn on this button to control the light with the remote control.
Can you have a wired in switch on the cable for in the cab but also have a wireless one for your keys
Hi, Yes, we could do pre-wired controll and wireless remote controll on the same set of lights. Please leave a note when you place order.
Can this be wired to a controller like Feniex 4200??
Hello, Thanks for your inquiry. It shouldn't, we will provide our remote control because our lights are programmed.
Do I need an extension cable per pod, so 4 lights = 4 extension cables?
Hello, Thanks for your inquiry. Our harness for this pods is 5 meters long, please buy according to your needs. If the 5 meter harness is not long enough, an extension cable per pod, 4 lights = 4 extension cables.
If I bought 2 sets at different times (one set now and one set later down the road) could I hook them up to the same controller with no problems?
Hello, thank you for your inquiry, yes, but you have to contact us so that we can arrange a new set of harnesses so that one remote can control all the lights.
Do these come with mounting brackets? Can’t see in pictures
Hi, thanks for your inquiry. All our lights come with mounting brackets & wire harness, please don't worry.
In the video these strob ditch lights flash all the colors. Is that a option that’s possible to get? In the options it says to pick one color.
Hi, Thanks for your inquiry. You can leave a note or cantact us when you place the order. we will customize the color for you.
Is wiring necessary in the cab or is the remote all that’s needed
Hi, Thanks for your inquiry. We offer wire harness, just use remote control the lights.
With the remote controller dose wiring need to enter the cab? Or just powered under the hood.
Hello, thank you for your inquiry. We offer a set of wire harnesses that need to be connected with positive and negative poles. The wire harness and control box can be placed under the hood. There is a switch button in the wire harness that needs to be placed in the cab. The remote controller is a control lamp that can be placed anywhere.
Is it possible for a rocker switch with: Off, Green on, White & Green on?
yes, we can make the rocker switch with 3 pattern off , green , white&green, on , when you place an order, please leave a note under order details.
Can the side shooter warning lights be set to steady burn and be flashed through an external controller?
yes, if you want use your own control switch , you can choose custom wire control , for example toggle switch or button switch .
Hello, So I have a few of your lights already and I love them but I have a set of two red/red pods one of my 4 pin extension ended up touching my exhaust and melted through the cables it blew out my fuse but I think it also ended up damaging my Synchronous wire harness is there any way I can order that separately?
yes, please contact us via this page . https://www.vividlightbars.com/pages/contact-us