Kindly Note : SS stand for 8 buttons controller for one set light , not only sync all light bars & led pods, but also separately control all light bars and all led pods by long time press switch buttons.
422 means 8 buttons controller for one set light, 4 buttons for light bars, 2 buttons work for the front 2 pods, 2 buttons work for the rear 2 pods, separate control!
44-1 means one 8 buttons controller for one set light, 4 buttons work for all light bars, the other 4 buttons work for all led pods separately.
44-2 means Only one 8 buttons controller for two sets lights (one light bar and 4 led pods), 4 buttons work for one front set light, the other 4 buttons work for the rear set light separately.
Learn more about the products:
Dimension : 3.2" for Pods & 7.3'', 10.5", 13", 19", 21.5", 25", 31", 37", 43", 49", 50.8", 54" for a Light Bar
- Height 54.5mm x Depth 82.8mm for light bar, 3.75"wide x 2.95" tall x 3" deep for the pods
LED Power : 48W for Pods & 18W, 30W, 36W, 54W, 60W, 72W, 90W, 108W, 126W, 144W, 150W, 162W for a Light Bar
Luminous Flux : 1600lm for each Pod & 1350lm, 2250lm, 2700lm, 4050lm, 4500lm, 5400lm, 6750lm, 8100lm, 9450lm, 10800lm, 11250lm, 12150lm for a Light Bar
Optional Beam : Spot for Pods & 4D Spot Beam for Light Bar
Operating Voltage : 12~24V DC for Light Bar & Pods
Waterproof Rate : IP68
Body Color : Black
Lens Material : PC
White Light Color Temperature : 6000K
Housing Material : Diecast aluminum alloy
Mounting Bracket : Stainless Steel
Working Temperature : -40ºC~+85ºC
Lifespan : >30,000hrs
Wiring Harness Length : 196.85 inch(5 meters) for pods & 129.92 inch(3.3 meters)
Warranty : 1 Year
What include the package :
4/6/8 x 3.75" LED Pods & 1 x LED Light Bar
4/6/8 x Universal Mounting Brackets for Pods & 1 x Universal Mounting Bracket for a Light Bar
1 x Quad Sync Wiring Harness for Pods & 1 x Single Wiring Harness for a Light Bar
4 x Wireless Remote or 2 x Pre-Wired Controller
2 x Vivid Light Bars stickers
About Custom Control Wire
The custom control wire is for those people who wants to control the light bar with their vehicle control systerm panel.
1. Custom control wire:
There are four wires on the control box, two wires go to the positive and nagetive power wires, and the others go to the signal wires to control the color. Touch the positive wire with anyone signal wire to show color. (There will be no strobe function for this custom control wire unless there is strobe function on your truck.)
2. New custom Wire:
It will come with 4 wires [ White wire for turn on/off, Yellow wire for sync strobe/flash patterns, Red wire for alternate strobe patterns, Black wire for solid pattern], touch the positive to show. ( Applying new custom wire can bring strobe flash patterns even though there is no strobe function on your vehicle.)
How to use the anti-interfence remote:
Identification code learning: within 6 seconds after the pods are on power, click one of any buttons of the new remote at least three seconds, then let go of it, remote learning finish.
If you want to use over two remote to control these pods, please repeat the operation within 6 seconds after the first step.
If you still can not control the pods, please repeat the operation of first step as well.
Delete identification code: click one of any buttons before pods are on power, connect the pods to power source, continue clicking the button over 3 seconds, then let go of it, identification code is deleted.
If delete fail, please repeat the operation.