About Custom Control Wire Option
The custom control wire is for those people who want to control lights by their existed switch control panel inside their vehicles.
1. Custom control wire for toggle switch:
The kind of custom wire version lights has only one specific flash pattern designed for the police, firefighters or towing drivers. Its function is very simple (one steady white color, one specific flash pattern, e.g. alternaring white & amber or strobe white & amber etc.) When you touch two toggle switches at the same time, white light will be showed first. If you choose this kind of custom wire option, we will contact you confirm the specific flash pattern.
Please note :
If we do not receive your reply for a long time, we will arrange the default patterns for you.
Learn more about the products:
2. Custom control wire for push button switch:
This custom control wire comes with 4 wires. [ One wire for turn on/off, One wire for sync strobe/flash patterns, one wire for alternate strobe patterns, one wire for solid pattern such as steady white or amber ] It has up to 40 patterns by every wire touching the power positive to show.
Dimensions: 7.3 inch
LED Power: 18W
Optional Beam: Flood/Spot
Operating Voltage: 9-30V DC
- 4pcs*5w Epistar LEDs
Waterproof Rate: IP 68
Body Color: Black
Lens Material: PC
Current Draw: 0.83A@12V, 0.42A@24V
White Light Color Temperature: 6000K
Housing Material: Diecast aluminum alloy
Mounting Bracket: Stainless Steel
Working Temperature: -40ºC~+85ºC
Wiring Harness Length: 5 meters
What include the package :
- 2 or 4 x LED Light Bar
- 2 or 4x Universal Mount Bracket for Two LED Light Bar
- 2 x Wireless Remote
- 1 x Synchronous Wire Harness
How to use the anti-interfence remote:
Identification code learning: within 6 seconds after the pods are on power, click one of any buttons of the new remote at least three seconds, then let go of it, remote learning finish.
If you want to use over two remote to control these pods, please repeat the operation within 6 seconds after the first step
If you still can not control the pods, please repeat the operation of first step as well.
Delete identification code: click one of any buttons before pods are on power, connect the pods to power source, continue clicking the button over 3 seconds, then let go of it, identification code is deleted.
If delete fail, please repeat the operation.