Hello, we usually need 2-4 business days to prepare and 5-7 business days for delivery. Besides, we will notice you by email when we get the tracking number. You can also check your order status by this link https://www.vividlightbars.com/apps/parcelpanel
Hello, Thanks for your inquiry. They use same led chips, just different in light cup, 4d lens can make light output is more concentrated and brighter. regular reflector make light output is more divergent and the illumination range is wider
For the main LED, if you choose white/amber, there will be solid/flash white color, solid/flash amber color; main LED will be controlled by remote controller, you need to add chasing halo for the lights, chasing halo will be controlled by Bluetooth APP named Magic LED.
Dual Color Lights they can be used as regular led light bar when they are fixed white color. They can also be used as emergency light when they strobe. It's dual use, when you choose white/amber, there will be solid/flash white, solid/flash amber.
There are up to 20 strobe modes for RGB Halo; There are up to 200 Chasing patterns for Chasing Halo. And they use two different APP, the RGB Chasing halo, app called Magic LED. The RGB halo, Not chasing The app called Magic Light.
Control programme learning: within 3 seconds after the pods are on power, click one of any buttons of the new remote at least three seconds, then let go of it, remote learning finish.
If you want to use over two remote to control these pods, please repeat the operation within 6 seconds after the first step
If you still can not control the pods, please repeat the operation of first step as well.
Please check this video:
Delete programme: press A button before pods are off power, connect the pods to power source, continue press A button 3 seconds, then let go of it, press the A button for 3 seconds again, then press A button to turn on the light, programme is deleted.
If delete fail, please repeat the operation.
Please check this video:
About Custom Wire (add customized wires for customer's existing switch control system )
Many customers just want use our lights without our control sysytem (wireless remote control), connect them to their existed switch control panel, so we provide some lights with customized wires, so than they still use their own control system , it is very easy to come true, just connect these customized wires to customers' switch control system, will get all our lights, flash , solid color patterns.
What is the difference between toggle switch and button switch ?
toggle switch triggers mode change by constant power supply （Press the toggle switch, it does not return to its original position）
Button switch triggers mode change by temporary power supply （Press the button down , The button returns to its original position）
SS remote is a 8-buttons controller for one set light, not only sync all light bars & led pods(in this case, you will control the lights by pressing the left row button only), but also separately control all light bars and all led pods by long time pressing "the left row switch D button" (after you finish switch, the left row is for light bar, the right row is for led pods). [Button A is Turn On/Off, Button B is sync patterns, Button C is alternate strobe patterns, Button D is solid pattern.]
When you turn on the lights, found some pods are out of control, some pods can respond to remote. Don’t be worry, Please follow these steps: Power on all the pods, press A button and hold until all pods are off, then press A button again to turn them on.The pods should be controlled synchronously.