شريط إضاءة LED ستروب خلفي للطرق الوعرة مقاس 38 بوصة بقوة 108 وات
أشرطة إضاءة زاهية مقاس 38 بوصة من مصابيح LED الخلفية للطرق الوعرة لمركبات UTV وATV وPolaris RZR XP 1000 900 والمركبات جنبًا إلى جنب و4x4 وشاحنة Trophy - سلسلة RZ RBYBR.
سمات:
1. الكتلة رقم 1 ورقم 5 أضواء التشغيل الحمراء / أضواء الفرامل / أضواء إشارة الانعطاف؛
الكتلة رقم 2 ورقم 4 من العنبر ستروب العنبر + العنبر المتسخ؛
الكتلة رقم 3 ضوء أبيض ثابت أو عكسي
اضغط لفترة طويلة على زر التبديل لمسح الأوضاع.
شريط إضاءة LED الكهرماني الوامض يتميز بأنماط مختلفة. يتحكم بشكل مستقل في ضوء الفرامل، وضوء الرجوع للخلف، وأنماط الإضاءة الوامضة.
2. أكثر سطوعًا وفعالية من شريط ضوء ستروب LED القياسي، تتضمن أنماط ستروب الكهرمانية ستروب متزامن، سريع وبطيء متناوب، وما إلى ذلك.
3. عالمي لجميع المركبات ذات مصدر طاقة 12 فولت.
شريط إضاءة LED ستروب خلفي للطرق الوعرة مقاس 38 بوصة
تحديد:
- الأبعاد: 96.52 سم (الطول) * 2.6 سم (الارتفاع) * 4.3 سم (العمق)
- تسخير الأسلاك طول: 16.40 قدمًا ( 5 أمتار)
- أسلاك الإشارة الطول: 8 أقدام (2.4 متر)
- مقاوم للماء: IP68
- الجهد: تيار مستمر 12 فولت
- الطاقة: 108 واط
- عمر طويل: أكثر من 20000 ساعة
- الوظيفة: أضواء التشغيل والتوقف، ضوء الرجوع للخلف، ضوء ستروب كهرماني ، ضوء إشارة الانعطاف، ضوء الفرامل.
- الضمان: ضمان لمدة سنتين
كيفية الاستخدام:
يوجد سلكان في مفتاح التحكم، أحدهما متصل بالقطب الموجب والسالب، وهو سلك الطاقة . أما أسلاك الإشارة الأربعة الأخرى فتتصل بالسلك الموجب لتغيير الألوان أو الأوضاع.
- السلك الأسود: لضوء الانعطاف إلى اليمين (الكتلة رقم 1 أو رقم 6).
- السلك الأصفر: لضوء الانعطاف إلى اليسار (الكتلة رقم 1 أو رقم 6).
- السلك الأحمر: لأضواء التشغيل/ضوء الفرامل (الكتلة رقم 1 ورقم 6).
- السلك الأبيض: للضوء العكسي (الكتلة رقم 3 ورقم 4 ).
إذا كانت لديك أي أسئلة حول شريط الضوء الخلفي LED Strobe مقاس 26 بوصة، فلا تتردد في الاتصال بنا!
QUESTIONS & ANSWERS
Have a Question?
-
What if I wanted block #2 and #4 white instead of amber.
Yes, it can be done. Just leave a note whenpalcing order.
-
Is it possible to get the amber and reds flashing?? (used to fend off/ block a road)
Hi, yes, it is , you can custom make any color flash , when you place an order, please leave a note. we will make it according to your request
-
What are the mounting options. Does it have magnetic mounts as well
Hi, thank you for your inquiry. Offroad Rear Chase LED Strobe Light bar has no magnetic mounts, it only can be install by screw.
-
How do I get a red running light on all the time and hit the brakes to make the red light brighter??
There are two wires in the control switch, one of which is connected to the positive and negative poles, which is the power wire. The other 4 signal wires touch the positive wire to change colors or modes.
- Black wire : For turn right light.
- Yellow wire: For turn left light.
- Red wire: For brake Light.
- White wire: For Reverse Light.
P.S. Brake light is set to be brighter than running light.
If you have any requirements, please leave a note when placing the order. -
How to stop amber strobe and make them a solid running light
Hi, thank you for your question. The strobe mode can be turn off by the switch.
-
how do I make the running lights less bright than the brake lights??
Hi, thank you for your question. It is already set the running lights to be less bright than the brake lights.