شريط إضاءة عمل LED متزامن/بديل مقاس 7.3 بوصة، مثبت على سطح مستوٍ، مصابيح LED للطرق الوعرة بقوة 18 وات

Hey can I hook these up to my factory aux switches and not use the remote ?

yes, you can choose customer wires for toggle switch or button switch ,  then connect the light's signal wire to your own switch .

what are the dimensions of the hole to cut to mount these

hi, the dimensions of between the two holes is 170mm. the diameter of the hole is 6mm

I'm looking for extension for these lights four of my lights wires came up short. Where can I find them on your website

hi, this is dual color light extension wire order link A 16.40 Feet Extension Cable (5 Pins) for one dual-color light Bar | Vivid Light Bars

Can I wire two of these and two of the side shooters to the same control module

Hello, yeah you can wire these two together, but wiring these two kinds of lights to the same control module may cause the 3.75'' side shooters lack of some flash patterns because the programming of these two lights are different.

can you have two lights onon steady whute and the other two flashing

Hi, Thanks for your inquiry. Our Dual Color led lights when you choose white/amber, there will be solid/flash white, solid/flash amber.

How long are the cables from the harness to the lights?

Hi, all our wire harness are 5 meters long. If the length is not enough, you can add extension cables. Each extension cable gives 1 light, which is also 5 meters long.

Are they able to do steady burn on the white and then flash the other color?

Hi, Thanks for your inquiry. Our Dual Color led lights when you choose white/amber, there will be solid/flash white, solid/flash amber.

If i chose the color WHite/RBA. Can i chose than white/white?

Hello, Thanks for your inquiry. what color do you want? You can leave a note when you place your order, we will inform you if we can customize or not.

What is the lumen rating? And is it a 3 wire light(power, ground, and one to switch pattern)?

Hello, the lumen of this light is about 1350LM. This light is controlled by the remote control, and it is the same as our dual-color pods. Just connect the positive and negative poles.

Are these lights controlled by the wireless controller as well

Hi, Thanks for your inquiry. Yes, these Dual Color Lights controlled by the wireless controller.

Voltage input ? 12 or 24 v

Hello, Thanks for your inquiry. The voltage is 12-24V.

Do they need a relay or are they straight 12v? If no relay, what Amp fuse to run the 6 pack?

no, it doesn't have a relay , but there is a 10 Amp fuse on the wire, these lights are connect to 12v vehicle battery. each light is 0.8A, 6 packs is in total 4.8A.

Can I have it so one switch has the steady white lights on and another switch has the lights flash white and yellow

yes, we can make lights coming with 2 wires , one wire for steady white, the other wire for flash white and amber .