As the newest alternating flash pattern added,the newest upgrade 3.2 inch one octave color changing pods are super cool. It is a super version from Vivid Light Bars, when you drive your truck with this kit of pods to a show, you must be the focus on the show, cause the pods are so bright and awesome!!!
Kindly Note : 422 means 4 buttons for light bars, 2 buttons for one set pods, 2 buttons for the other set pods, separate control ！
44 means 4 buttons for all light bars, 4 buttons for all led pods. separate control.
Learn more about the products:
Dimension : 3.2" for Pods & 21.5'', 31.5'', 41.5'', 50'', 52", 54" for a Light Bar
LED Power : 20W for Pods & 120W, 180W, 240W, 288W, 300W, 312W for a Light Bar
Luminous Flux : 1600lm for each Pod & 9000lm, 13500lm, 18000lm, 21600lm, 22500lm, 23400lm for a Light Bar
Opitonal Beam : Flood/Spot for Pods & Combo for a Light Bar
Operating Voltage : 12V DC for Pods & 12~24V DC for a Light Bar
Waterproof Rate : IP68
Body Color : Black
Lens Material : PC
White Light Color Temperature : 6000K
Housing Material : Diecast aluminum alloy
Mounting Bracket : Stainless Steel
Working Temperature : -40ºC~+85ºC
Lifespan : >30,000hrs
Wiring Harness Length : 196.85 inch(5 meters) for pods & 129.92 inch(3.3 meters)
Warranty : 1 year
What include the package :
6 x LED Pods & 1 x LED Light Bar
6 x Universal Mounting Brackets for Pods & 1 x Universal Mounting Bracket for a Light Bar
1 x Hexa Sync Wiring Harness for Pods & 1 x Single Wiring Harness for a Light Bar
4 x Wireless Remote or 2 x Pre-Wired Controller
2 x Vivid Light Bars stickers
About Custom Control Wire
It would comes with 2 power wires and 2 signal wires if you choose custom control wire. Connect two power wires to your truck battery and two signal wires to your own controller. Two signal lines control two colors separately. For example, if you choose White/Amber, one of signal wire controls white and another one controls amber.
(There will be no strobe function for this custom control wire unless you have a strobe function on your truck.)
How to use the anti-interfence remote
Identification code learning: within 6 seconds after the pods are on power , click one of any buttons of the new remote at least three seconds, then let go of it, remote learning finish.
If you want to use over two remote to control these pods, please repeat the operation within 6 seconds after the first step
If you still can not control the pods, please repeat the operation of first step as well.
Delete identification code: click one of any buttons before pods are on power, connect the pods to power source, continue clicking the button over 3 seconds, then let go of it, identification code is deleted.
If delete fail, please repeat the operation.